Need help?Do you have a question about the FAAC XT2-XT4 FDS 433-868 and is the answer not in the manual?
General| Number of Channels | 2 or 4 |
|---|---|
| Number of Buttons | 2 or 4 |
| Coding | Rolling code |
| Battery Type | CR2032 |
| Operating Temperature | -20°C to +55°C |
| Operating Voltage | 3V |
| Type | Transmitter |
| Battery Life | 2 years |
| Transmission Range | 50-150 meters (open space) |
| Frequency | 433.92 MHz and 868.35 MHz |
Explains the meaning of various symbols used throughout the manual for clarity and comprehension.
Identifies the physical parts, buttons, and LED indicators of the XT2 and XT4 transmitters.
Details the technical specifications, operational frequencies, and unique features like two-way communication.
Step-by-step instructions for programming a new transmitter into the receiver via the learning button.
Procedure to copy codes from an already memorized transmitter to a new one.
Guide for using two-way FDS BD transmitters to send an open command to the automation.
Procedure to check the current status (open/closed) of the automation system.
Instructions to change the transmitter's protocol from FDS to Secondary SLH.
Instructions to revert the transmitter's protocol from Secondary SLH back to FDS.
Process for programming an SLH transmitter into the system when in SLH mode.
Procedure to generate new, unique radio codes for all transmitter buttons, invalidating previous memorization.
Activates a lock feature that prevents new memorization procedures on receivers or other transmitters.
Instructions for replacing the transmitter's battery when indicated by a red flashing LED.
To Next Page
