FAAC XT2-XT4 FDS 433-868 - Convert SLH to FDS Mode

TX 12 532402web - Rev.A
2
4
1
3
» = 2 S
x2
x 3
Fig.8
4.2 CONVERTING THE TRANSMITTER BACK FROM SLH TO FDS
A transmitter that was converted into a Secondary SLH can no longer be
memorised on the receiver or by other transmitters.
Press any button on a transmitter converted into a secondary device, the
LED immediately lights up steadily.
Press buttons P1 and P2 simultaneously for
2 seconds.
Within 10 seconds, press button P1 3 times
in sequence.
When released, the LED flashes slowly red.
The LED flashes green twice.
10 s