FAAC XT2-XT4 FDS 433-868 - FDS Mode Advanced Procedures; Transmitter Code Randomisation

TX 14 532402web - Rev.A
2
4
1
3
» = 2 S
» = 2 S
Fig.10
5. FDS MODE  NONREVERSIBLE PROCEDURES
5.1 RANDOMISATION PROCEDURE
This procedure generates new radio codes on all buttons of the transmitter.
After randomisation, the transmitter will no longer work in the systems in which it had been
memorised.
Press buttons P1 and P2 simultaneously for
2 seconds.
Press buttons P1 and P2 simultaneously for
2 seconds.
When released, the LED flashes slowly
green.
When released, the LED flashes quickly red.