FAAC XT2-XT4 FDS 433-868 - Requesting Automation Status

TX 10 532402web - Rev.A
2
4
1
3
Fig.6
3.4 STATUS REQUEST
This procedure can only be carried out with XT2-XT4 FDS BD 433-868
transmitters and on boards with an integrated two-channel decoding
system that are compatible with the XF FDS radio module.
Press the button (P...) on the transmitter.
The LED starts to flash green.
Release the button within 5 seconds.
Keep it pressed until the LED turns steady
green.
The transmitter vibrates and the LED turns
steady red: automation closed.
The transmitter vibrates and the LED turns
steady green: automation open or moving.
5 s