FAAC XT2-XT4 FDS 433-868 - Memorizing SLH Transmitters

TX 13 532402web - Rev.A
x2
x 2
» = 2 S
2
4
1
3
≤ 5 cm
MASTER SLAVE
Fig.9
4.3 MEMORISING AN SLH TRANSMITTER
An FDS transmitter modified to Secondary SLH mode operates on the
433/868 MHz frequency band transmitted by the Primary SLH transmitter
during memorisation.
Primary SLH:
Press buttons P1 and P2 simultaneously for
2 seconds.
When released, the LED flashes slowly.
Press the button on which you wish to memorise the code.
Press and hold the button to be
transferred.
The LED lights up steadily.
A double red flash will indicate that it was memorised correctly.
When used for the first time, press the memorised button twice in succession.