Confidential Page 27
Unlock Sync: It is defined to enable the unlock execution
synchronic to the attendance interval. The unlock execution will
be only executed at the first time for the same user during defined
time of attendance interval time.
The default is off.
Sensor: User can set sensor type with
None/NO/NC
The default sensor is “None”.
User can set detection delay time.
The default duration is 10 seconds.
The duration range is 1~99 seconds.
Security – Alarm
Remove Alarm Switch: Enable/Disable tamper alarm
function.
The default is OFF.
Sensor Alarm Switch: Enable/Disable sensor alarm
function.
The default is OFF.
Rejection Alarm Switch: Enable/Disable rejection alarm function
To Next Page
Loading...