FaceID F910 - Page 26

Confidential Page 26

 Attendance – Work Code
 Work Code: It is defined to mark the work
code related to each record such as
engineering, maintaining, training etc.
The default is off. If Work Code is on, user
has to select the desired work code after
verification.
 Add: User can browse/add work code on
this list.
 Edit and Delete: User edit the work status
and code with ID/Name.
 Security
 Security – Access Control
 Unlock: User can set duration time of
unlock.
The default duration is 3 seconds.
The duration range is 0~10 seconds.