Circumstances that could cause an Abort situation during maintain:
• The battery is severely sulfated or has a weak cell and will not hold a charge.
• There is a large draw on the battery and the charger has to supply its maximum
maintain current for a 12 hour period to keep the battery at full charge.
BATTERY DISCONNECTED
CHARGE MODE - DOUBLE CLICK TO CONFIRM
POWER SUPPLY MODE - DOUBLE CLICK TO CONFIRM
mode.
EXTERNAL BATTERY VOLTAGE TOO HIGH
more than the unit with power supply mode.
POWER SUPPLY ON
power supply mode.
OFF
stop the charger or power supply. The display will show OFF and then SELECT MODE.
•
•
13.1 Cleaning and user maintenance should not be done by children without supervision.
13.2 After use and before performing maintenance, unplug and disconnect the battery charger
(see sections 6, 7 and 8).
13.3
connectors, cords, and the charger case.
13.4 Ensure that all of the charger components are in place and in good working condition, for
example, the plastic boots on the battery clips.
13.5 Servicing does not require opening the unit, as there are no user-serviceable parts.
13.6
13.7 If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
14.1 The cord will still conduct electricity until it is unplugged from the outlet.
14.2 Store inside, in a cool, dry place.
14.3
14.4 If the charger is moved around the shop or transported to another location, take care to
avoid/prevent damage to the cords, connectors and charger. Failure to do so could result
in personal injury or property damage.
harm to the environment or human health from uncontrolled waste disposal, and
to promote the sustainable reuse of material resources, recycle it responsibly. To
discard your used device, please use the return and collection systems or contact
the retailer where the product was purchased, for environmentally-safe recycling.
13. MAINTENANCE INSTRUCTIONS
14. MOVING AND STORAGE INSTRUCTIONS
15. DISPOSAL INFORMATION
To Next Page
Loading...
