Need help?Do you have a question about the fadini Bart 350 and is the answer not in the manual?
Essential checks for gate structure and hinges before installing the opener.
Explanation of the status and diagnostic LEDs on the Elpro 35M control board.
Explanation of the status and diagnostic LEDs on the Elpro 35S control board.
Guide to configuring gate opener functions using DIP-switches.
Key information and steps for programming the gate opener system.
Explanation of self-programming and manual programming options for the Elpro 35M.
Setting delays for manual gate opening and closing operations.
Steps and considerations for the automatic gate programming cycle.
Final steps and checks after completing the gate opener programming.
Wiring and function of safety edge input for gate opening.
Wiring and function of safety edge input for gate closing.
Procedure for setting the torque for the gate opener motor to ensure safe operation.
Details on automatic, semi-automatic, and other operational modes of the gate opener.
How to manually unlock and move the gate.
Steps to re-engage the gate's automatic locking mechanism.
Procedure to reset the gate opener system to its default settings.
Troubleshooting guide for common gate opener faults and their solutions.
Pre-installation checks regarding site conditions, structure, and safety.
Guidelines for qualified technicians performing the gate automation installation.
Information for end-users on proper operation and maintenance contracts.
Recommendations for optimal system performance and regular maintenance.
Instructions for the proper disposal of packaging and electronic materials.
General| Brand | fadini |
|---|---|
| Model | Bart 350 |
| Category | Gate Opener |
| Language | English |
To Next Page
