55
OPERATION
The residual heat indicator
Once a hot cooking zone is switched o, "H" is displayed on the relevant cooking zone's display
to warn that the "cooking zone is still hot!"
Do not touch the cooking zone
at this time owing to the risk of
burns from residual heat, and do
not place any object on it which is
sensitive to heat!
When the residual heat indicator goes out,
cooking zone can be touched, however keep
in mind that it may still be warmer than ambi-
ent temperature.
When there is no power, the resid-
ual heat indicator does not light up.
Limit the operating time
In order to increase eciency, the induction
hob is tted with a operating time limiter for
each of the cooking zones. The maximum
operating time is set according to the last heat
setting selected.
If you do not change the heat setting for a long
time (see table) then the associated cooking
zone is automatically switched o and the
residual heat indicator is activated. However,
you can switch on and operate individual
cooking zones at any time in accordance with
the operating instructions.
Cooking heat
setting
Maximum op-
erating time
(hours)
1 6
2 6
3 5
4 5
5 4
6 1.5
7 1.5
8 1.5
9 1.5
P 0.16
To Next Page
Loading...
