56
OPERATION
Automatic warm-up function
● Select the required cooking zone (3) so that the display shows "0.".
● Set any heat level with touch sensor (2) by sliding your finger to the right, then hold the
sensor in the same position for 3 seconds, until letter "
A
" appears
The display of the relevant cooking zone
will alternate between showing the letter
"
A
" and the desired heat setting selected.
After a certain time of operation at boosted power, the cooking zone switches back to
the heat setting set, which will be shown on the display.
If automatic warm-up function is
activated and "9" heat setting is
selected or no heat setting selec-
tion is made within 3 seconds, the
automatic warm-up function will
deactivate.
If a pot is lifted from the cooking
zone and replaced before the
warm-up countdown is completed,
the warm-up function will resume
and countdown will continue until
completed.
Cooking heat
setting
The duration of
the automatic
warm-up
(minutes)
-
1 0.8
2 2.4
3 3.8
4 5.2
5 6.8
6 2.0
7 2.8
8 3.6
9 0.2
_
_
_
_
_
_
To Next Page
Loading...
