Fagor 8065 - Page 24

Error solving manual.
CNC 8060
CNC 8065
·24·
(REF: 1709)
1071 'Incompatible G functions (G70/G71)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1072 'Incompatible G functions (G80-G88/G160-G166/G281-G286/G287-G297)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1073 'Incompatible G functions (G90/G91)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1074 'Incompatible G functions (G93/G94/G95)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1075 'Incompatible G functions (G96/G97/G192)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1076 'Incompatible G functions (G100/G101/G102)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1077 'Incompatible G functions (G115/G116/G117)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1078 'Incompatible G functions (G134/G135)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1079 'Incompatible G functions (G138/G139)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.
1080 'Incompatible G functions (G6/G261/G262)'
DETECTION During execution.
CAUSE Two or more G functions incompatible with each other have been programmed in the
block.
SOLUTION Program the functions in different blocks.