Need help?Do you have a question about the Fagor 8065 M and is the answer not in the manual?
General| Resolution | 640 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Processor | ARM Cortex-A8 |
| Operating System | Windows CE |
| Communication Ports | Ethernet, USB, RS-232, RS-485 |
| Power Supply | 24 VDC |
| Display Type | LCD TFT |
| Touch Technology | Resistive |
| Protection Rating | IP65 |
Discusses responsibility for injuries from unauthorized hardware manipulation.
Guarantees no viruses and user responsibility for unit virus-free status.
Outlines essential safety measures for preventing harm and damage.
Provides information on CE conformity and warranty terms for the CNC.
Lists technical specifications for the MONITOR-21 MULTITOUCH.
Details the various connectors available on the monitor.
Lists technical specifications for the PPC-21W.
Lists technical specifications for the PPC-19.
Guides on how to install the FagorConnect application.
Explains the purpose and functionality of the FagorConnect application.
Details the basic technical characteristics of the CNC 8065 models.
Describes customization options for an open system.
Option to add axes to the default CNC configuration.
Enables dual-purpose machines for milling and turning cycles.
Allows PLC programming in IEC 61131 language.
Simplifies programming for users without prior knowledge.
Provides high-definition 3D graphics for program execution and simulation.
Information on CE conformity declaration availability.
Details on warranty conditions for the CNC.
Manual version with corrected errors.
Precautions to prevent personal injury from the unit.
Safety measures to follow during unit repairs.
Guidelines for using the unit in industrial environments.
Recommendations for installing the unit in a suitable location.
Identifies ESD-sensitive components.
Instructions for packing the unit for return.
Cleaning procedures and safety measures for the CNC unit.
Specific safety measures to take before cleaning the unit.
Recaps safety measures for avoiding injuries and damages.
Information on installation and startup for industrial environments.
Describes the monitor's role as a display and touch screen interface.
Lists connectivity options like USB, RS-232, VGA, DVI-D.
Explains power supply options and consumption.
Details connection types and maximum lengths for various interfaces.
Table showing physical dimensions in mm and inches.
Outlines requirements for the enclosure design and protection.
Step-by-step instructions for securing the monitor module.
Details the recommended 24 V DC power supply for the monitor.
Describes the function of each button on the monitor's rear panel.
Details the recommended USB connector for the touch screen.
Details the recommended 24 V DC power input connector.
Instructions for connecting the VGA video input.
Details the 12 V DC power input, marked as not recommended.
Details the cable characteristics for VGA video signal connection.
Explains how to use the rear keyboard buttons with the OSD menu.
Describes how to display the OSD menu and its icons.
Explains how to select video input via the OSD menu.
Details how to adjust contrast and brightness using the OSD menu.
Explains how to adjust geometry settings for DVI input.
Lists available language options for the OSD menu.
Explains OSD configuration settings like H. Position and Timeout.
Describes the auto-configuration feature for the monitor.
Explains how to restore monitor settings.
Describes how to exit the OSD menu.
Instructions on how to lock the OSD menu.
Instructions on how to unlock the OSD menu.
Introduces the PPC-21W Panel PC and its features.
Lists connectivity options for the PPC-21W.
Details processor, memory, graphics, and storage specs.
Illustrates network connection without company network access.
Details USB, Ethernet, and CAN connections.
Details connections to a switch for Ethernet network.
Table showing physical dimensions in mm and inches.
Outlines requirements for the enclosure design and protection.
Specifies minimum clearances for ventilation and heat dissipation.
Information on power dissipation from the PPC-21W.
Step-by-step instructions for securing the PPC-21W module.
Details the 24 V DC power supply for the monitor.
Details the 24 V DC power supply for the Panel PC.
Describes the functions of the rear keyboard.
Instructions for connecting the touch screen via USB.
Details the recommended 24 V DC power input connector.
Describes USB 2.0 and USB 3.0 ports.
Explains the HDMI and VGA output connections.
Details the Ethernet LAN ports and their LEDs.
Describes the RS-422/485 serial line connectors.
Functions of the power and reset buttons.
Explains the Tx/Rx LEDs for COM ports.
Explains the HDD and power status LEDs.
Details the RS-232 serial line connectors.
Details the Ethernet LAN ports and their LEDs.
Describes the high definition audio output.
Describes the function of each button on the monitor's rear panel.
Details how to connect the VGA video signal.
Specifies the cable characteristics for the touch controller.
Specifies the cable characteristics for Ethernet connections.
Discusses transmission speeds and recommendations for Ethernet.
Importance of proper cable insertion for performance.
Explains how to use the rear keyboard buttons with the OSD menu.
Describes how to display the OSD menu and its icons.
Explains how to select video input via the OSD menu.
Details how to adjust contrast and brightness using the OSD menu.
Explains how to adjust geometry settings for DVI input.
Lists available language options for the OSD menu.
Explains OSD configuration settings like H. Position and Timeout.
Describes the auto-configuration feature for the monitor.
Explains how to restore monitor settings.
Describes how to exit the OSD menu.
Instructions on how to lock the OSD menu.
Instructions on how to unlock the OSD menu.
Introduces the PPC-19 Panel PC and its features.
Lists connectivity options for the PPC-19.
Explains power supply options and consumption.
Illustrates a point-to-point connection diagram with the CNC.
Details connections to a switch for Ethernet network.
Table showing physical dimensions in mm and inches.
Outlines requirements for the enclosure design and protection.
Specifies minimum clearances for ventilation and heat dissipation.
Information on power dissipation from the PPC-19.
Step-by-step instructions for securing the PPC-19 module.
Details the 12-24 V DC power supply for the monitor.
Lists connectors on the PPC-19 and their functions.
Details the Ethernet LAN ports and status LEDs.
Details the recommended 24 V DC power input connector.
Details Ethernet connection types and characteristics.
Specifies the cable characteristics for Ethernet connections.
Guides on how to install the FagorConnect application.
Explains the purpose and functionality of the FagorConnect application.
Details how to configure the FagorConnect application for CNC connection.
Lists and describes the main parameters for application configuration.
Describes the operating modes (User/Administrator) for the Panel PC.
Shows how to access diagnostic information about the Panel PC itself.
Explains how to map network drives for CNC access to PC resources.
To Next Page