Fagor 8065 M - About the Product - CNC 8065; Basic Characteristics

Panel PC.
CNC 8065
·5·
(REF: 1801)
ABOUT THE PRODUCT - CNC 8065
BASIC CHARACTERISTICS.
Basic characteristics. 8065 M 8065 M Power
Basic Pack 1 Basic Pack 1
Number of execution channels. 1 1 1 1 to 4
Number of axes. 3 to 6 5 to 8 5 to 12 8 to 28
Number of spindles. 1 1 to 2 1 to 4 1 to 4
Maximum number of axes and spindles. 7 10 16 32
Number of tool magazines. 1 1 1 to 2 1 to 4
Limited to 4 interpolated axes. Option Option Option Option
Basic characteristics. 8065 T 8065 T Power
Basic Pack 1 Basic Pack 1
Number of execution channels. 1 1 to 2 1 to 2 1 to 4
Number of axes. 3 to 5 5 to 7 5 to 12 8 to 28
Number of spindles. 2 2 3 to 4 3 to 4
Maximum number of axes and spindles. 7 9 16 32
Number of tool magazines. 1 1 to 2 1 to 2 1 to 4
Limited to 4 interpolated axes. Option Option Option Option
Basic characteristics. 8065 M 8065 M Power 8065 T 8065 T Power
Number of handwheels. 1 to 12
Type of servo system. Analog / Digital Sercos / Digital Mechatrolink
Communications. RS485 / RS422 / RS232
Ethernet
Integrated PLC.
PLC execution time.
Digital inputs / Digital outputs.
Marks / Registers.
Timers / Counters.
Symbols.
< 1ms/K
1024 / 1024
8192 / 1024
512 / 256
Unlimited
Block processing time. < 1 ms