Panel PC.
CNC 8065
5.
·89·
(REF: 1801)
FAGORCONNECT APPLICATION.
5.5 Diagnosis.
The "Diagnosis" button at the top shows information about the Panel PC itself.
The "Save to file" button allows you to save the information in a file.
5.6 Accessing Panel PC resources from the CNC.
The Panel PC is configured to export its resources so that the CNC can see your hard drive
and any possible pen drives that are connected. In order for programs from any of these
storage devices to be quickly executed, it is necessary to configure them from the CNC as
network units. This operation is completed from the Windows file explorer on the CNC.
File explorer > Tools > Map network drive
To Next Page
Loading...