Fagor 8065 M - 3.2 PPC-21 W General Diagram; 3.2.1 Networking Without Company Network Access

Panel PC.
CNC 8065
3.
·45·
(REF: 1801)
PPC-21W.
3.2 General diagram (PPC-21W).
3.2.1 Networking, without access to the company network.
CAN
HORIZONTAL KEYB 2.0 +
TOUCHPAD
USB 2.0
PPC-21W
HBH3
HANDHELD TERMINAL
CNC U65
CNC U70
ETHERNETETHERNET
OP PANEL
Connection. Description.
USB 2.0 Connection of a USB keyboard to the PPC-21W. Use the keyboard cable.
Maximum cable length: 800 mm (2.62 ft).
Ethernet. Connecting the CNC to the PPC-21W.
Maximum cable length: 100 m (328 ft).
Connecting the HBH3 to the PPC-21W.
CAN Connection of keyboards and operator panels.
Maximum length of bus; 500 m (1640 ft) for CANopen bus.