Fagor 8065 M - 3.8.2 Touch Controller Connection; Touch Controller Cable Characteristics

Panel PC.
CNC 8065
3.
·62·
(REF: 1801)
PPC-21W.
3.8.2 Touch controller.
Connect the monitor’s T/S USB (touch controller) output to a USB 2.0 port on the panel PC.
Cable characteristics.
Fagor Automation supplies the necessary cable for the touch controller. Always use the cable
supplied by Fagor for the unit.
The monitor has two different outputs for the touch controller, RS232 and USB. Always use the monitor’s
T/S USB output to connect the touch control to the panel PC.
i
(A) The monitor’s touch controller output.
(B) Generic USB 2.0 input on the panel PC.
A
B

