Fagor BCSD - Page 39

Installation manual
BCSD
System
PLC
4.
REF. 1711
·39·
PLC program
;
;SPINDLE
;------------------------------------------------------------------------------------------------
;
DEF M_SP1_NMIN M215 ; Spindle stop (N=NMIN)
DEF M_SP1_REVOK M216 ; Aux. spindle speed reached M3-M4
DEF M_SP1_REQUEST_M3M4 M217 ; Spindle turn requested (M3-M4)
DEF M_SP1_SPENA M218 ; Spindle turn enable
DEF M_SP1_REQUEST_M19 M219 ; Spindle orientation requested
;
; DIGITAL DRIVE ENABLE
;------------------------------------------------------------------------------------------------
;
DEF M_DRV_X_NERR M230 ; X drive error
DEF M_DRV_X_NPOWER M231 ; X drive no power
DEF M_DRV_X_TORQUE M232 ; X drive with torque
DEF M_DRV_Y_NERR M233 ; Y drive error
DEF M_DRV_Y_NPOWER M234 ; Y drive no power
DEF M_DRV_Y_TORQUE M235 ; Y drive with torque
DEF M_DRV_Z_NERR M236 ; Z drive error
DEF M_DRV_Z_NPOWER M237 ; Z drive no power
DEF M_DRV_Z_TORQUE M238 ; Z drive with torque
DEF M_DRV_S_NERR M239 ; SX drive error
DEF M_DRV_S_NPOWER M240 ; SX drive no power
DEF M_DRV_S_TORQUE M241 ; SX drive with torque
;
;M300 ; User screen Marker
;
;*********************************************************************
;TIMERS
;*********************************************************************
;
;T1 ; Timer for AUXEND
;T2 ; Timer disable axis DRENA
;T3 ; Timer disable spindle DRENA
;T4 ; Timer DV11 (FAGOR Diagnostic)
;T5 ; Timer scroll PLC messages
;
;*********************************************************************
;COUNTERS
;*********************************************************************
;
;C1 ; CNC on seconds
;C2 ; CNC on minutes
;C3 ; CNC on hours
;C4 ; Spindle ON seconds
;C5 ; Spindle ON minutes
;C6 ; Spindle ON hours
;
;*********************************************************************
;PLC MESSAGES
;*********************************************************************
;
;MSG1 ; Drivers error
;MSG2 ; Input power
;MSG3 ; Axis reference
;
;*********************************************************************
;PLC ERRORS
;*********************************************************************
;
;*********************************************************************
;*********************************************************************
; FIRST CYCLE
;*********************************************************************
;*********************************************************************
;
CY1
;