To Next Page
J
Joseph OwensJul 30, 2025
What to do if my Fagor FI – 48 W will not fill but the power light is on?
- MMatthew OrtizJul 30, 2025
If the Fagor Dishwasher is not filling after closing the door and the power light is on, check the following: * Ensure the water hose isn't blocked or kinked and the water valve is open with pressure exceeding 20 PSI. * Make sure the machine is level using the adjustable legs. * Inspect the overflow tube for proper attachment and condition, including the O-ring. * Check the wiring of the door switch, and replace the switch (Ip) or door relay (Rp) if faulty. * Verify the fill pressure switch (P1) for position change 1-2 / 1-3, ensuring it's not stuck. * Confirm the wiring and voltage to the fill valve (V), replacing the valve if necessary.
General
