FagronLab™ BASIC – User Manual | 23
FagronLab™ BASIC
Quick-lock coupling
Pic.: Quick-lock coupling
Hold the FagronLab™ logo, on top of the jar, to the front. Load the stirring shaft directly from the front into the lift arm. Push up the
mixing unit, at the same time apply slight pressure from the top to the lift arm and with a slight turn counterclockwise (about a
quarter turn) fix the mixing unit into the lift arm.
Move the mixing unit so far up that the bayonet noses are inserted into the device top.
After pushing the confirm button the mixing process will start.
The mixing unit has to be moved evenly up and down in its available range (lid-bottom). The lift guidance will support the process
enormously.
After the mixing process is finished the free spin program will be initiated. The display will show :
Move the lift arm all the way down, until the stirrer will touch the FagronLab™ jar lid. After confirming with the compounding
button the mixing motor will accelerate to level "9".
The MB will be mostly clean, the mixing process is finished and move the lift arm into its lowest position for an easy extraction of
the mixing unit.
With every finished mixing process the FagronLab™ PRO will automatically issue an identification number (ID). The identification
number will simplify documentation and exact reproduction of the mixing process and will be shown on the display after every
mixing process.
Pic.: Preparation free spin
To Next Page
Loading...