FagronLab™ BASIC – User Manual | 6
1. Installation information
2. Initial operation
FagronLab™ BASIC
The FagronLab™ BASIC weighs 22 lbs (10 kg).
Select a suitable location for the FagronLab™ BASIC.
• Solid, horizontal surface
• Away from direct airflow from air conditioning systems, heaters, open windows or fans
• No direct sunlight, keep the temperature steady between 15°- 30° C (59 - 86 °F) and maximum humidity of 80 %
• Clean, dry and dust-free
Remove all components from the cardboard box. Check to ensure that the following components are included in your
shipment:
• FagronLab™ BASIC mixing device
• Standard mixing Blades 1 - 4
• Power cable
• Disposable Blade starter kit I
• Operating instructions
Please contact your local FagronLab™ support team or dealer in case components are missing or arrived damaged.
To ensure proper return without additional costs please, hold on to the original cardboard box and packing material of the
FagronLab™ BASIC.
The warranty lapses if the original packing materials are not used for return deliveries.
If the device is exposed to cold weather conditions, please allow the device to acclimatize for approx. 30 minutes, this will
prevent humidity and condensation from interfering with the device’s proper operation.
The socket outlet is located on the rear of the FagronLab™ BASIC. First connect the power cord to the socket outlet and then
plug the power cord into the power outlet.
The power button is also the emergency button. It is located on the rear of the device.
Use the power button to turn on the FagronLab™ BASIC. Now the device is ready for operation.
To Next Page
Loading...