FagronLab™ BASIC – User Manual | 30
Move the finished compound close to the lid to prevent a "squirting out" of the ointment when first dispensed. A large applicator
is standardly delivered with a 200 ml jar as pushing aid. Jars 300 ml up to 2000 ml use a spindle or the AirDynamic. The little cap
or the applicator may now be fasten in place.
A label may be attached on the jar prior forwarding to the client, preferably together with a short illustration of how to use and
apply the FagronLab™ dispensing system.
After completion of every single process, the FagronLab™ BASIC issues automatically an identification number (ID). The display
shows the ID and it conducts an easier documentation and an exact reproduction of the mixing process.
The FagronLab™ mixing parameters are an assistance in the right handling of the technology. The manufacturing with the Fagron-
Lab™ devices lies in the responsibility of the pharmaceutical personal.
FagronLab™ BASIC
6. General notes on the FagronLab™ mixing system
Identification number ID
Pic.: Display ID
The 13-digit identification number used to unmistakably mark preparations has the following structure:
To Next Page
Loading...