66
EN
Locate H.E.P.A 13 / Active Carbon Filter group into the electro-static lter group with blue
plastic surface facing outer side.
Replacing of H.E.P.A 13 / Active Carbon Filter
H.E.P.A 13 / Active Carbon Filter should not be washed. If it is heavily dirty, it should be
replaced with a new one.
ATTENTION!
For high performance of your appliance, it is recommended to replace 2 ply motor
protection lter, H.E.P.A 13/ Active Carbon Filter once in every 6 months.
Air Outlet Filter
Air outlet lter is located on exhaust cover. You can easily remove the lter from the cover.
Wash it under tap water and re-use after it is completely dry. Place air outlet lter aligning to
the housing on the cover and install exhaust cover to the appliance.
To Next Page
Loading...
