INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
21
Checking the Parts:You will need the following equipment to complete the
cooker installation satisfactorily:
• Restraining chain: If the cooker is to be supplied with
gas through a flexible hose, a restraining chain must be
fitted.
• Flexible gas hose.
• Gas pressure tester/manometer
• Multimeter: For electrical checks
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fitting the restraining chain
Levelling tool & Allen keys Full capacity shelf
To Next Page
Loading...
