FANATEC CSL E RW PS4 User Manual

28
• Step4: The currently installed rmware version is shown on the LED
display of the Fanatec
®
steering wheel for a moment as shown on the
picture on the right hand side:
• Step5: If the wheel center was not yet calibrated ‘CAL’ will
blink on the LED display of the steering wheel as shown
on the picture on the right hand side:
▪ Proceed with a manual wheel center calibration as
described in chapter ‘Hotkeys’ of this manual.
▪ The CSL Elite Racing Wheel is ready to use after
manual wheel center calibration.
•
Step6: Your CSL Elite Racing Wheel is ready to use. If
the wheel center was previously calibrated, step 5 can
be skipped and the CSL Elite Racing Wheel is ready to use immediately.
If you use a H-pattern shifter the wheel base rmware will request to
calibrate the gears automatically now. Refer to chapter ‘Shifter calibration
mode later in this user manual’.
7.3 Tuning menu
Activate the tuning menu by pressing the tuning menu button (see the
‘Hotkeys’ chapter of this user manual). The menu will be shown on the tuning
display of the Fanatec
®
steering wheels. To navigate through the tuning menu,
use the directional stick of the Fanatec
®
steering wheel.
Note: Tuning functions are subject to change and may be altered in future
rmware versions.
7.3.1 S_1 … S_5 (Setups)
Setups range: S_1 ... S_5 Setups default: S_1
The CSL Elite Racing Wheel provides ve different setups to store your adjusted
values independent from each other. To change which setup is active, move the
directional stick of the Fanatec
®
steering wheel in the up or down direction.

FANATEC CSL E RW PS4 Specifications

General

Brand	FANATEC
Model	CSL E RW PS4
Category	Video Game Controller
Language	English