FANATEC CSL E RW PS4 User Manual

34
8.1.4 Switching modes
The CSL Elite Racing Wheel will start in “PlayStation®4 Mode” by default. To
switch to other modes press the ‘Mode’ button once. The LED above the “
”
button will indicate the current operation mode (more colors can be shown with
other compatible platforms):
• Blue indicates „PlayStation
®4 mode“
• Red indicates „PC* mode“
• Purple indicates „ClubSport Wheel Base V2 compatibility mode“
NOTE: Once the mode was changed manually the CSL Elite Racing
Wheel will remember the last active mode and will boot in the same mode
next time. Exception: After rmware update was done.
8.1.5 Shifter calibration mode
To enter the H-pattern shifter calibration
mode press buttons
+ of the CSL Elite
Steering Wheel (PS4
TM
version) at the same
time while H-pattern shifter is connected, see
picture on the right hand side:
For other Fanatec
®
steering wheels please
refer to the corresponding quick guide for
more detailed information.
NOTE: After rmware update the CSL Elite Racing Wheel will request
the shifter calibration automatically as soon as a non-calibrated H-pattern
shifter is connected and detected. The menu will guide you through the
calibration steps as described next below.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.

FANATEC CSL E RW PS4 Specifications

General

Brand	FANATEC
Model	CSL E RW PS4
Category	Video Game Controller
Language	English