51
GENERAL CONTENT AND CONSULTATION
IT
EN
DE
FR
ES
ABS SYSTEM
The vehicle is equipped with an ABS system that operates
on both wheels. The ABS system is composed of an electro-
hydraulic device which limits the pressure inside the braking
system at the moment of braking. This occurs through the
detection of the tendency to block the phonic wheels “A”
(installed on the brake discs) carried out by the angular
speed sensors “B” placed on the forks.
The ABS system allows an increase in the braking stability of
the vehicle compared to a traditional braking system with
the aim of reducing the risk of falling.
The ABS system implements “cornering” functions that
optimises ABS operation even when the vehicle is inclined
preventing locking and slipping of the wheels within
the physical limits allowed by the vehicle and the road
conditions.
The cornering function is active only when ABS is active on
both wheels.
Do not exceed the physical road holding limits of
the vehicle. It is the rider’s responsibility to ride at
appropriate speeds, always evaluating the weather
and road conditions. The ABS cannot compensate
for errors in judgement and/or incorrect use of the
vehicle.
When the key is turned to the “ON” position, the ABS
indicator light turns on and flashes until the vehicle
exceeds 5 km/h, and then it turns off.
In the event of a battery malfunction, the ABS
system is deactivated.
BA
B
A
To Next Page
Loading...
