Fanvil PA3 User Manual

55
https://www.fanvil.com/Support/download/cid/14.html
9.21 Intercom Setting >> Time/Date
Users can configure the device's time Settings on this page.
Picture 33 - Time/Date
Table 21- Time/Date
Time/Date
Field Name
Explanation
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol
Primary Time Server
Set primary time server address
Secondary Time Server
Set secondary time server address, when primary server is not
reachable, the device will try to connect to secondary time server to
get time synchronization.
Time zone
Select the time zone
Resync Period
Time of re-synchronization with time server
Daylight Saving Time Settings
Location
Select the user's time zone specific area
DST Set Type
Select automatic DST according to the preset rules of DST, or the
manually input rules
Offset
The DST offset time
Month Start
The DST start month

Fanvil PA3 Specifications

General

DHCP server	Yes
Supported protocols	SIP v1 (RFC2543), v2 (RFC3261) over UDP/TCP/TLS RTP/RTCP/SRTP STUN DHCP IPv6 PPPoE L2TP OpenVPN SNTP FTP/TFTP HTTP/HTTPS TR-069
VPN support	L2TP / OpenVPN
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Package depth	58 mm
Package width	147 mm
Package height	114 mm
Input current	2 A
Input voltage	12 - 24 V
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Mounting type	Desktop/Wall mounting
Product color	Black
LED indicators	Status
Control display unit	-

Weight and Dimensions

Depth	31 mm
Width	125 mm
Height	84.2 mm