Fanvil V64 - Phone Features and Operations; Call Management Features; Advanced Call Functions; Connectivity and Personalization

Putting a call on hold
Call transfer
Attended transfer:
Blind transfer:
1. Press Xfer soft key during the active conversation, the call
is put on hold.
2. Dial the second telephone number.
3. When the call is answered, then press Xfer soft key to
complete the operation.
1. Press Xfer soft key during the active conversation, the call
will be on hold.
2. Then enter the 2nd telephone number and press Xfer soft
key.
1. Press Hold soft key, caller is put on hold.
2. To retrieve the call press Resume soft key.
Note: with more than one active call, select desired call
with the navigator key and use the corresponding soft key
to hold or resume.
Call forward
1. Press Menu > Features > Call Forward.
2. Select the line, the type of forward, enter the destination
number and status, and press OK soft key.
Call conference
1. Once in line with 1st caller, press Conf soft key, 1st caller
is put on hold.
2. Then call the 2nd number.
3. After, 2nd call is established, press Conf soft key to set up
the conference.
Programmable key
1. You can configure shortcuts for the programmable keys.
2. Press Menu > Basic > Keyboard, select among the
configurable items, and select your desired type and value,
press OK key.
Do not disturb
1. Press DND soft key, and enable the device do not disturb
mode.
2. Or press Menu > Features > DND, and select the Mode
and Type, and press OK key.
Call Mute
1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.
Redial
1. Press key, redial a call number.
Phonebook
Access Phonebook:
Add new entry:
1. Press Contact soft key, Press All Contacts or other group
> Press Add.
2. Enter name and number and press OK soft key.
1. Press or Contact soft key or Menu > PhoneBook >
Local Contacts.
2. Select All Contacts or other group.
3. To dial an entry, press Dial soft key or pickup handset or
press or .
Voice mail
1. To access your voice mailbox, press or Menu > Message
> Voice Message, number of messages will be indicated if
provided by your server or pbx.
2. Select the line and press Play to call.
Bluetooth
1. Press Menu > Basic > Bluetooth.
2. Press OK soft key to enter the bluetooth open interface.
After opening, press Scan soft key to display the list of
bluetooth scanned. Select any device and press connect.
WiFi
1. Press Menu > Basic > WLAN.
2. Press OK soft key to enter the WLAN open interface. After
opening, press Scan soft key to display the list of Wi-Fi
scanned.
3. Press Enter soft key to enter the available Network, select
the wireless network, press the Connect soft key and enter
the password to connect.
Call list
1. Press up navigator key or Menu > CallLog > Local Call Logs.
2. Scroll through the list using navigator key.
3. To dial an entry, press Dial soft key or pickup handset or
press or .