Quick Installation Guide
Fanvil Technology Co., LTD.
www.fanvil.com
X7A
Fanvil Technology Co., Ltd
Email:sales@fanvil.com Tel:0755-2640-2199
Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II),67th District, Bao'An, Shenzhen, China
V1.0
- 4 -
www.fanvil.com
Call forward
1.Press Phone Settings icon > Line > Select the line
> Forward Settings
2. Enter the destination number and the type of forward
and press OK icon
√.
Phonebook
Access phonebook:
Add new entry:
1. Press Contact icon ,Press All Contacts or other group
> Press Add icon.
2. Enter name and number and press OK icon
√.
1. Press Contact icon .
2. Select All Contacts or other group.
3. To dial an entry, press Dial icon .
Call list
1. Press Call Logs icon .
2. Scroll the list using navigation key or slide the screen
3. To dial an entry, press Dial icon or click the phone
icon at left then click dial icon or pickup handset or
press or .
Call Mute
1. Press to Mute the microphone during the call.
2. Press again to un-mute the conversation.
Programmable keys
DSS virtual keys :
Other keys :
You can also configure shortcuts for the navigation keys
and softkeys on web ui.
2. You can press Phone setting icon > Key, select the
SoftkeyScreen you need, then select among the configurable
items, and select your desired type and value, press Save.
1. You can use the phone web interface to configure the
keys of the screen.
2. Press unfold > you can press any keys which is still blank
or long press the key that have configured, select a type
and value, press
√icon.
Redial
Do not disturb
1. Press DND icon when standby or click Phone Settings
icon > DND.
2. Select the Mode.
1. Press , redial a call number.
Voice message
1. To access your voice mailbox, press Voice message key
or Voice message icon , number of message be
indicated if provided by your server or PBX.
2. Select the line and press phone icon to call.
Bluetooth
1. Press Bluetooth icon in the status bar to open Bluetooth.
2. Press Settings icon > Connected devices > Pair new device .
After opening, it displays the scanned Bluetooth list, select
any device, and click on the device pairing.
Wi-Fi
1．Enter the Settings icon > Network & internet > Wi-Fi,
enable Wi-Fi, and you can browse the list of available Wi-Fi;
2．Select the available network, click on the network to
enter the password to connect and click connect button.
P/N:CJBA100031C0
To Next Page
Need help?
General
