Faraday LW401 - Electrical Requirements for Battery Calculations and Power Management

26
Operation, Installation, and Maintenance Manual
LW-401
4ELBAT
SNOITALUCLACYRETTABROFSTNEMERIUQERLACIRTCELE
TNEMEGANAMREWOPDNA
ybdnatS
tnerruC
mralA
tnerruC
tnerruCdraoBniaM A011.0A021.0
:)4-1senoZ(tnerruCCDI
senoZCDIforebmuN
=)ybdnatS(A900.0________
=)mralA(A021.0________
A______
A0
A0
A______
CANrepA5.1=<tnerruC:tnerruCeciveDCAN
1etoNeeS________1CAN
________2CAN A0
A0
A______
A______
A5.0=<tnerruC:tnerruCtroPyrailixuA
1etoNeeSeludoM8-EZWL
A810.0tnerruCybdnatS
A810.0tnerruCmalA
syaleRdemmargorPforebmuN
=A620.0x________
A______
A0
A______
A______
A600.0tnerruCybdnatSeludoMA4-EZWL
A600.0tnerruCmralA
syaleRdemmargorPforebmuN
=A620.0x________
:)8-5senoZ(tnerruCCDI
senoZCDIforebmuN
=)ybdnatS(A900.0x________
=)mralA(A021.0x________
A______
A0
A______
A0
A______
A______
A0
A______
A600.0tnerruCybdnatSeludoMA8-EZWL
A600.0tnerruCmralA
:)8-5senoZ(tnerruCCDI
senoZCDIforebmuN
=)ybdnatS(A900.0x________
=)mralA(A021.0x________
A______
A_____
A0
A______
A0
A______
eludoMW/B8-ARWL
seludoMW/B8-ARWLforebmuN
=)ybdnatS(A010.0x________
=)mralA(A240.0x________
A______
A0
A0
A______
eludoM1-TCWL
=ybdnatS
=mralA
A050.0
A0
A0
A543.0
latoTA______A______
tnerruCH-AybdnatS)06ro,84,42(sruoHybdnatStnerruCybdnatSlatoT
H-A______________=__________________x___________
tnerruCH-AmralA).niM5(rotcaFreilpitluMH-AtnerruCmralAlatoT
H-A______________=380.0x___________
=22.1x)tnerruCH-AmralA+tnerruCH-AybdnatS(
eziSyrettaBH-AmuminiM
H-A______________
otlauqeronahtsselsnaem=<
NOTE:
1. In addition to deter-
mining the required
battery size, consider-
ation must be given to
the overall current
drawn by the system.
The total system
current capability is
3.5 amps at 24 volts.
The total alarm
current must not
exceed 3.5 amps for
any combination of
the basic system plus
any additional
modules used. When
installing additional
modules, the current
available for the NAC
circuits and auxiliary
port must be derated
to keep the total alarm
current below 3.5 amps.