Faraone ELEVAH 40 MOVE - Page 14

USE AND MAINTENANCE MANUAL - SECTION 2
ELEVAH 40 MOVE / 40 B AERIAL PLATFORM – Rev. 12_2021
Page 2-5
ELEVAH 40 B MODEL GENERAL TECHNICAL DATA
Value
Weight of the machine (overall):
Refer to the CE plate affixed to
the machine.
Maximum resting force on the ground (per wheel/stabiliser (*):
Refer to the CE plate affixed to
the machine.
Machine height (in transport position):
173 cm
Permitted use
INTERNAL USE
Machine base overall dimensions without stabilisers:
100 cm x 71 cm
Maximum hydraulic system pressure:
~ 60 bar
Required amount of oil for the hydraulic system:
~ 2.5 Litres
Power supply
2 x 12V 50Ah Lead acid
batteries
Operators in the cage:
1
Maximum capacity in the cage + objects holder tray + objects
holder platform (optional):
200 kg
Maximum cage height (from the ground to the floor of the cage):
1.95 m
Maximum cage height with self-propeller (from the ground to the
floor of the cage):
N.A.
Internal dimensions of the cage:
~ 61 cm x 55 cm
Max shifting speed in transport position:
N.A.
Maximum self-propelled movement speed at a height:
N.A.
Maximum cage rising speed:
0.15 m/s
Maximum cage descending speed:
0.15 m/s
Maximum longitudinal / transversal gradient in the transport
position:
15%
Maximum longitudinal / transversal gradient in the raised
position:
“Levelled” base
* Maximum force per stabiliser considering that 70% of the weight of the machine plus the maximum load inside the cage
are entirely distributed on one side only of the platform (entirely asymmetrical load)