USE AND MAINTENANCE MANUAL - SECTION 4
ELEVAH 40 MOVE / 40 B AERIAL PLATFORM – Rev. 12_2021
ANTI-COLLISION RADAR SYSTEM (OPTIONAL)
Front anti-collision radar (E40 RADAR 1)
It is a distance detector installed on the machine base that prevents
accidental impact with obstacles during frontal movements and stops the
machine about 10 cm away from any obstacle.
NOTE: The image refers to a particular machine model, which may therefore vary depending on the machine
model on which the system is installed.
Rear anti-collision radar (E40 RADAR 1B)
It is a distance detector installed on the machine base that prevents
accidental impact with obstacles during rear movements and stops the
machine about 10 cm away from any obstacle.
NOTE: The image refers to a particular machine model, which may therefore vary depending on the machine
model on which the system is installed.
Top anti-collision radar (E40 RADAR 3)
It is a distance detector installed in the cage that prevents the operator
from accidentally collide with overhead obstacles while the cage is lifted
and stops the machine a safe distance away from any overhead
obstacle.
NOTE: The image refers to a particular machine model, which may therefore vary depending on the machine
model on which the system is installed.
To Next Page
Loading...
