11
PRIOR USING FOR THE FIRST TIME
FILL THE RINSE AID DISPENSER
Rinse Aid Dispenser
Function Of Rinse Aid
Attention!
When To Refill The Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your
dishes. That can leave spots and streaks. It also improves drying by allowing water to sheet
off the dishes. Your dishwasher is designed to use liquid rinse aids. The rinse aid dispenser
is located inside the door next to the detergent dispenser. To fill the dispenser, open the cap
and pour the rinse aid into the dispenser until the level indicator turns completely black. The
volume of the rinse aid container is about 110ml.
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot
and streak free drying.
Only use branded rinse aid for dishwasher. Never fill the rinse aid dispenser with any other
substances (e.g. Dishwasher cleaning agent, liquid detergent). This would damage the
appliance.
As the rinse aid diminishes, the size of the black dot on the rinse aid level indicator changes,
as illustrated below.
Full
3/4 Full
1/2 Full
1/4 Full - Should refill to eliminate spotting
Empty
If there is no rinse-aid warning light in the control panel, you can judge the amount of rinse-
aid by the color of the optical level indicator C located next to the cap. When the rinse-aid
container is full, the whole indicator will be dark .As the rinse-aid diminishes, the size of the
dark dot decreases. You should never let the rinse aid get below 1 / 4 full.
To Next Page
Loading...
