32
Disconnecting Your Dishwasher
Start Of Dishwasher
1. Shut off the water supply at the faucet.
2. Disconnect the power supply cord
The following things should be checked before starting the dishwasher.
1. The dishwasher is level and fixed properly
2. The inlet valve is open
3. There is a leakage at the connections of the conducts
4. The wires are tightly connected
5. The power is switched on
6. The inlet and drain hoses are knotted
7. All packing materials and printings should be taken out from the dishwasher
After installation, please make sure to keep this manual.
The content of this manual is very helpful to the users.
ATTENTION:
To Next Page
Loading...
