35
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes Meanings Possible Causes
E1 Longer inlet time. Faucets is not opened, or water intake is
restricted, or water pressure is too low.
E3 Not reaching required temperature. Malfunction of heating element
E4 Overflow Some element of dishwasher leaks.
Ed Failure of communication between
main circuit board with display circuit
board
Open circuit or break of wiring for the
communication.
■ If overflow occurs, turn off the main water supply before
calling a service.
■ If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting the
dishwasher
WARNING
To Next Page
Loading...
