25
Remarks:
Cleaning The Filter
- Inspect the filters for blocking every time the dishwasher has been used.
- By unscrewing the coarse filter you can remove the filter system. Remove any food
remnants and clean the filters under running water.
To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts
as shown in the figures in the last page and reinsert the entire assembly in the dishwasher,
positioning in its seat and pressing downward.
When cleaning the filters, don’t knock on them. Otherwise, the
filters could be contorted and the performance of dishwasher
could be debased.
WARNING
Open
Step 1：Counter-rotate the filter assembly(A,B and C),
then lift it all up.
Step 2: Lift B and C up from A;
A
B
C
A
B
C
The End
Note:
Note:
If you follow from Step 1 to Step 3, the filter system will be removed. If you reverse the steps from Step 3 to Step
1, the filter system will be installed.
The entire filter assembly should be cleaned once a week.
To Next Page
Loading...
