EasyManua.ls Logo

Farberware FCD06SDWHT - Page 8

Farberware FCD06SDWHT
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
WARNING! PROPER USE (Cont.)
READ AND FOLLOW THIS SAFETY
INFORMATION CAREFULLY SAVE THESE
INSTRUCTIONS
The door should not be left in the open position since this could present a tripping
hazards.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard.
Remove the door to the washing compartment when removing an old dishwasher from
service or discarding it.
Please dispose of packing materials properly.
Use the dishwasher only for its intended function.
During installation, the power supply must not be excessively or dangerously bent or
flattened. The door should not be left in the open position since this could present a
tripping hazards. Do not tamper with controls.
The appliance is to be connected to the water mains using new hose sets and that old
hose-sets should not be reused.
The maximum number of place settings to be washed is 6.
The maximum permissible inlet water pressure is 1Mpa.
The minimum permissible inlet water pressure is 0.04Mpa.

Related product manuals