WITHOUT C
OAX *
WITH
COAX
27
(GB- '99)
476. Video distributor-amplifier.
It allows for the distribution of the video signal
coming from the cameras on 5 independent
lines. It is not necessary to close on 75Ω the
unused outputs.
Connection of the coaxial cable with distribution on maximum 5 column rising (serial and/or with video floor distributors)
Connection of coaxial cable with distribution on 9 columns rising
In video systems with different
columns rising or with a high
number of users, it is necessary
to use the video distributor-am-
plifier art.476.
It is not necessary to close the
unused outputs on the 75Ω re-
sistance.
If more than one video distributor is to be
used, an extra supply, art. 1281 is neces-
sary.
Connection of art. 476 as video amplifier for long distance systems
For this use, one output is to be connected; do not close the other outputs on the 75Ω resistance.
* MODY * E
RREP/R *
PROJECT *
PUNTOVIRGOLA *
SLIM
Terminals
F General ground
14 Positive power supply
IN Video signal input
1-2-3-4-5 Video signal outputs
Video ground (shield of the coaxial cable)
Technical data
Power supply 21 ± 3Vdc
Operating current at max. load 250mA
Gain at max. load from 0 to 3.5dB (adjustable)
Gain with one output closed to 75Ω from 0 to 9dB
(adjustable)
Bandwidth >5MHz
Operating temperature 0°÷+50°C
Maximum permissible humidity 90% RH
Housing DIN 8 modules A
INSTALLATION INSTRUCTIONS
To Next Page