To Next PageTo Next PageWhy does my Farfisa Si 5050 Intercom System have audio with humming in the background?
The humming in the background (50/60 Hz) may be due to the wires being routed alongside cables powering high AC loads. To resolve this, separate the ground connection of the electric door speaker and the nameplate lights.
What to do if the electric door lock does not function on my Farfisa Si 5050?
If the electric door lock isn't working, the issue might be with the wire size being too small. Verify that the wire connections match the installation diagram.
How to fix Farfisa Si 5050 Intercom System monitors that shut OFF?
If the monitors are shutting off, ensure that the wire connections align with the installation diagram.
Describes PT5160, PT5660W, and PT5860W monitors.
Describes PV2160, PV2160W, and PV1260 monitors.
Covers MODY frames, covers, shelters, modules, cameras, and door stations.
Covers ErreP/R camera units, door speakers, amplified door stations, and panels.
Describes the 1281 stabilized power supply unit.
Describes the 1382 audio-video timer unit.
Describes the 8-image video memory unit.
Addresses issues like monitors off, no audio, or image absence.
Covers intercom issues, entrance activation, and door lock failures.
Details power supply, distributors, wire cross section, and installation notes.
Covers system operation and wiring examples for 4+1 systems.
Shows installation diagrams for multi-way 4+1 systems.
General| Brand | Farfisa |
|---|---|
| Model | Si 5050 |
| Category | Intercom System |
| Language | English |
