16
Once Insight is installed
On the teacher computer, the Insight icon appears in the System Tray. To begin using Insight, double-
click the icon to open the Insight console.
On student computers, the same Insight icon appears in the System Tray. Placing the cursor over the
icon displays the teacher channel and IP address used by the student computer. Double-click the icon
to open Insight. You can right-click the icon to display a quick menu with additional options.
Additional Insight Utilities
Additional utilities can be found in the Utilities folder on the Insight CD-ROM or secure download.
Use one or more of the following .exe files to enhance and customize Insight based on the type of
classroom environment. e following utilities are not available in the Insight Home Edition.
Utility Executable Description
Channel Selector EnableChannelSelect.exe
Allows the teacher to set multiple channels
(teacher computer only)
IP Directed Broadcast DirBcastAddr.exe
Calculates the IP address to allow
the teacher to broadcast to student
workstations across different subnets
Switch to Teacher SwitchToTeacher.exe
Allows the student machine to become a
teacher machine until the next reboot
Wake Up WakeUp.exe Tests Wake-On-LAN functionality
Changing Channels
If the teacher needs to change the channel of student computers they can do any of the following:
1. Reinstall the product and select a new channel.
2. Run setchannel.exe, which is located in the utilities directory (applicable only for Insight
7.0).
3. Change the channel from the Insight console. If EnableChannelSelect.exe has been run by
an administrator, the teacher can change the student channels from the console using the
following procedure:
a. Select the machines.
b. Click Administer > Change Student Channel.
c. Select the new channel
d. Click OK.
To Next Page
Loading...