Fasep 2000 srl Rev. 1.6
Videotronic V585.2.U: User’s Manual 14 march 2022
4-1
8 HOW TO OPTIMIZE UNBALANCE OF THE WHEEL
8.1.1 MAIN MENU > OPTIMIZE
Measure the unbalance of the rim only ( fig. 65).
Mount the tire on the rim and put the wheel on the shaft
(fig.66).
Spin the wheel
Select the optimization and follow the video instruction.
WARNING: Balancing with flanges, put the accessories assembled to the rim during the complete operations.
NOTE: Selection of optimization: the green solution is the advised from the machine. The user can be choose also
one of the other.
Fig. 65 first spin, rim only
Fig. 66 second spin, complete wheel
To Next Page
Loading...
