Fastech S-SERVOII - Product Check; Installation Guidelines; Cable Connection Safety

www.fastech.co.kr - 5
◆ Check the Product
Check the Product is damaged or parts are missing.
Otherwise, the machine may get damaged or the user may get injured.
Attention
◆ Installation
Carefully move the S-SERVOⅡ.
Otherwise the Product may get damaged or User's foot may get injured by dropping the
product.
Use non-flammable materials such as metal in the place where the S-SERVOⅡ is to be
installed.
Otherwise, a fire may occur.
When installing several S-SERVOⅡ in a sealed place, install a cooling fan to keep the
ambient temperature of the S-SERVOⅡ as 50℃ or lower.
Otherwise, a fire or other kinds of accidents may occur due to overheating.
The process of Installation, Connection, Operation, Checking and Repairing should be
done with qualified person.
Otherwise, a fire or other kinds of accidents may occur.
Attention
Warning
◆ Connect Cables
Keep the rated range of lnput Voltage for S-SERVOⅡ.
Otherwise, a fire or other kinds of accidents may occur.
Cable connection should follow the wiring diagram.
Otherwise, a fire or other kinds of accidents may occur.
Before connecting cables, check if input power is off.
Otherwise, an electric shock or a fire may occur.
The case of the S-SERVOⅡ is insulated from the ground of the internal circuit by the
condenser. Ground the S-SERVOⅡ.
Otherwise, an electric shock or a fire may occur.
Attention
Warning