www.fastinc.com 1-800-243-9271 229-51319 D © 2007-2010 FAST
10 & 18 Product Cooking Controllers
Display Descriptions
Programming: PRODUCT KEY
8
This document contains confidential information. The dissemination, publication, copying, or duplication of this document or the software described herein without prior written authorization is strictly prohibited.
Controller is waiting for a pass code to be entered.
Controller is in Product Key Programming Standby mode.
Stage cooking time (1-10) is displayed.
Stage cooking temperature (1-10) is displayed.
Stage timing mode (1-10) (flex or straight) is displayed.
Solenoid condition (1-10) (open or close) is displayed.
Action alarm status is displayed.
After fryer is filtered, this display prompts you to refill the fryer with oil.
Controller is in System Programming Standby Mode.
Controller is in Fahrenheit or Celsius Programming Mode.
Controller is in Appliance Type Programming Mode.
18 button controllers have two displays that show a full line of information; for
example:
10 button controllers have a single, dual-purpose display that will alternate infor-
mation; for example:
then
ENTER PROGRAMMING
MODE.
Press and hold the P key for 3
seconds.
Press the down arrow key.
PROGRAM will be displayed.
Press the P key.
RECIPE 1724
STORE EMPLOYEE
To Next Page
Loading...
