Safety Instructions
Setup
Read all instructions before you use this device. Do not make any changes or create
settings not described in this manual. If physical injury, loss of data, or damage is
caused by failure to follow instructions, the warranty does not apply.
1. Do not expose the device to rain or moisture to reduce the risk of fire or electric
shock. Objects filled with liquids, such as vases, should not be placed on this device.
2. Do not place this device on soft surfaces such as tablecloths or carpets.
Otherwise, the device could be a fire hazard.
3. Do not place this device in areas susceptible to excessive dust and dirt or near
any appliance generating a strong magnetic field.
4. To prevent overheating, do not block or clog the ventilation openings.
5. Never place this device in a confined space. Always leave enough space around
this device for ventilation.
6. Protect this device from overexposure to direct sunlight, heat, large temperature
fluctuations, and moisture. Avoid extreme temperatures. This device's proper
operations and storage temperature and accessories are 0°F to 95°F.
7. When this device runs for a long period of time, the surface may become hot.
Shut it down immediately and unplug the charger. Resume operation after this
device has cooled down.
8. Always handle this device with care. Avoid touching the lens. Do not allow
children to operate the device without supervision.
9. Never place heavy or sharp objects on this device.
10. To avoid electric shock, do not disassemble.
11. Use attachments or accessories specified by the manufacturer only.
12. Avoid extreme vibrations as they may damage the internal components.
EN01
To Next Page
Loading...