Faudi AFGUARD - Blue LED Warning Light; AFGUARD Loop Tester; AFGUARD Torque Spanner; External Key Switch

Version 2.6
Operating instructions
AFGUARD
®
Zone 0 and Zone 1
Page: 28
of: 41
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
BA_AFGUARD_Ex_rev2.6_Englisch_l
ogo
Blue LED warning light
Order reference: 600361
Description: Blue LED warning light 24 V DC IP66
Linked with: Contamination Control System Silver
(740000)
Light indicator according to JIG bulletin 110 to indicate
warning and or alarm situation in case of critical levels of
free water.
AFGUARD® loop tester
Order reference: 600514
Description: AFGUARD® Loop Tester
Linked with: AFGUARD® (120500)
Loop tester to periodically test the loop of the AFGUARD
installation according to JIG requirements.
AFGUARD® torque spanner
Order reference: 600513
Description: AFGUARD® Torque Spanner
To install the AFGUARD sensor with the right torque
setting of 50 Nm.
External key switch
Order reference: 600087
Description: External key switch
External key switch to reset the warning and alarm levels
of the Contamination Control System, non-Ex variant,
IP66.
10.1 Installation accessories
Optional torque wrench with spanner inserts SW36
Optional ¾" sleeve for welding into pipe lines (aluminium/stainless steel)
Spare gaskets for 3/4" sleeve connection.