Faudi AFGUARD - Nameplate

Version 2.6
Operating instructions
AFGUARD
®
Zone 0 and Zone 1
Page: 8
of: 41
FAUDI Aviation GmbH, Scharnhorststraße 7 B, D-35260 Stadtallendorf
BA_AFGUARD_Ex_rev2.6_Englisch_l
ogo
In addition to the markings of name and serial No., there is an engraved nameplate on the
housing of the AFGUARD
®
with additional information:
Picture: Nameplate of a Hazardous Area approved Version of the AFGUARD
®
for
hazardous Area Zone 0/1
2.1.1 Nameplate
It is prohibited to commission the equipment if the nameplate is no longer legible or is
completely missing.
Take organizational measures to ensure:
That the nameplate and possible affixed prohibition, or instruction labels on the equipment
are kept legible!
If the nameplate is painted on or destroyed, the sensor is damaged and may no longer
be used.
Solution: Remove the paint or buy a new sensor!
Make sure the sensor is not damaged by using chemical products when removing the paint.