Faytech FAY-002 - 3.3 Advanced menu; 3.3.1 Power Management

3-3
Chapter 3: BIOS setup
3.3 Advanced menu
The Advanced menu items allow you to change the settings for the CPU and other
system devices.
Be cautious when changing the settings of the Advanced menu items. Incorrect
eld values can cause the system to malfunction.
3.3.1 Power Management
Power Mode [ATX Type]
Select power supply mode. Conguration options: [ATX Type] [AT Type]
ERP Function [Disabled]
Enables or disables ERP power saving function. Conguration options: [Enabled]
[Disabled]
Restore AC Power Loss [Last State]
[Power Off] The system goes into off state after an AC power loss.
[Power On] The system goes into on state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the
system state was before the AC power loss.
ACPI Settings
ACPI Sleep State [S3 (Suspend to RAM)]
Select the highest ACPI sleep state the system will enter when the Suspend button
is pressed. Conguration options: [Suspend Disabled] [S3 (Suspend to RAM)]
Wake Configuration
Resume on PCIE/XHCI/RING [Disabled]
Enables or disables resume from PCIE/XHCI/RING signal: [Disabled] [Enabled]
Wake system from S5 [Disabled]
[Disabled] Disables system wake up from S5.
[Fixed Time] The system will wake up at the specied hr::min::sec.
Conguration options: [Disabled] [Enabled] .
[Dynamic Time] The system will wake up at the current time plus a specied
number of minutes.
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.