FBD 564 - Service Interface Level Menu - Machine Settings; Machine Settings

Service Interface Level Menu
Manual
On/Off
Machine
Settings
Readouts
Machine
Totals
Load All
Defaults
Common Side
Bevtrak*
MACHINE SETTINGS
SIDE (1-4)
Expansion
Setting Range 0 - 6, Defaulted at 3
Thaw/Freeze
Setting Range 0 -20, Defaulted at 10
FUB Mode
Allows Customer to Formulate Non-Carbonated Product, Defaulted at OFF
COMMON
SER #
Enter Serial # @ Installation, Defaulted at 99999999
Volt Offset
Compensates the Differences Between LCD and Measured Line voltage
Blink Out of
Sold Out Light Stays on Solid Rather than Blink When Enabled
37