LCD Messages
53
22 DefBtr
Defrost mode from machine OFF mode.
23 DefWt
Defrost is in Waiting mode
24 Defrst
Machine is in defrost mode
25
DefSpd
Defrost suspended due to freezing of other barrels
26
DefPrO
Out of product condition during defrosting
27
FILL H
Tank pressure in above FULL pressure in filling mode
28
RunBtr
Freeze mode from machine OFF mode.
29
RunHGW
Freeze mode from machine OFF mode while another barrel is waiting to defrost
30
RunCWt
Waiting for compressor turn on from the machine OFF mode
31
RunFrz
Commanding reeze down cycle in the machine READY mode
32
RunFWt
Running freeze down cycle in the machine READY mode
33
RunTha
Machine is in Thaw state but in READY mode
34
RUNThW
Transition from “RunTha” to “RunFrz”.
35
PresMx
Tank pressure is above 55 psi
36
RunPrO
Product out in the freeze down process
37
Fillng
Machine in filling mode, has not satisfied the FULL pressure value
38
Fill H
Tank pressure is above FULL value.
39
ProdOt
CO2, water or syrup out in filing process.
40
PRODOT
CO2, water or syrup out in filing process for more than 15 mins
41
FPause
Pause routine in filling process
42
Lfill
Tank pressure below REFILL pressure in first freeze process
43
LFillH
Tank pressure is above FULL pressure in first freeze process